Special Rose Arches, Gazebos, Obelisks, Tunnels or Pergolas and other commisioned items. 

This page is for other garden related products which are not always plant supports or for special versions of our standard products. We also make one off or commissioned items please contact us on 01487 814049 or by e-mail from the contact us page if you would like more information.

This is our Traditional Rose Tunnel or pergola it is based on a design used frequently during the nineteenth century for not only training roses but also fruit trees.It would have been originally made in solid wrought iron bar, where ever possible we continue to make these in solid bar. Very large sizes may need to be made in box section.

Constructed in modular form these traditional tunnels can be made to nearly any length.

The tunnel is made by connecting solid bar hoops (composed of three pieces) with horizontal bars.

Standard walk through width is 4 feet (1.220metres) and distance between hoops is 39" (1metre), height in centre is approximately 7' (2.1metres). Standard tunnel is six foot six long, four feet wide inside and seven foot tall in the centre inside. We have made these in lengths of 26 feet (8 metres) and widths of six foot six (2 metres).

Please contact us with your requirements if you would like a price.

Special Traditional Rose Tunnel

This is a large special rose tunnel made for a client to replace a wooden structure at the end of its' life. The site was very uneven and fell from front to back 500mm (20").

The width is 2.2m approx (7' 4") and is 8m (26') long

                                   

Special Traditional Rose Arch

          

 We can make deep plain arches by producing single sections of our traditional rose tunnel. This example attractively featured in the gardens of one of our stockists (R&R Saggers, Newport in Essex) shows it to good effect. This particular example is seven feet wide and two foot six inches deep

Very Large Arch

This is the largest Arch we have made so far it is shown assembled and erected at our worshop prior to galvanising.

We usually erect any special arch or gazebo that we have not made to a particular size before despatch to check for rigidity and ease of assembly.

This monster is approximately seventeen feet wide and when it is three feet into the ground will be fifteen feet high in the centre and eleven feet six at the sides with a depth of four feet.

Made for one of our regular customers in Hertfordshire this tall obelisk is photographed next to the standard version to show the increased height.

Contact us if you need something out of the ordinary, we may be able to help.

Special Large Shelford Gazebo

 You don't have to just use these for weddings but if you need something larger we can often help.

This example has been galvanised then powder coated white

This beautiful iron arch was made for a major local hotel over ten years ago and has been in regular use since then. The roses when in bloom on this arch provide a wonderful setting for wedding photographs. The internal width is 2750mm (nine feet).

We have made others to the same design for large gardens.

The arch is roughly 3 metres (10') square and about 3 metres tall drive through height.